#### INTRODUCTION

In transportation infrastructure design the route is defined based on its axis (centreline) – the alignment model. This simplified abstract model is designed in such a way to clearly define the principle course of the infrastructure project.

For most of the transportation means the infrastructure alignment design is split into two main two-dimensional complex strings: the horizontal alignment and the vertical alignment.

The horizontal alignment consist of three types of elements:

- Line segments – straights
- Circular arcs
- Transition curves

The movement of the transportation vehicle over circular elements is generating lateral accelerations, dependant on the speed of the vehicle and on the radius of the curve. In order to avoid the sudden change of these accelerations when passing from a curve to a different curve or a straight, the horizontal alignment includes transition curves. These curves have a continuous variation of curvature, ensuring the smooth transition between the horizontal alignment elements of constant curvature.

The most well-known transition curve is the Clothoid. In its real world application the clothoid enables a car driver to ride smoothly by turning the steering wheel with a constant speed, defining a clothoidal spiral, a continuous and linear curvature variation.

**A curve with so many names …**

The clothoid equations were first defined by Leonhard Euler; this is why, in general Physics the curve is often called Euler spiral. The French physicists Augustin-Jean Fresnel and, later, Alfred Cornu, rediscovered the curve and defined its parametric equations – hence the curve is sometimes called Fresnel or Cornu spiral.

(source of the image: Levien, R. (2008) *The Euler Spiral: A mathematical history.)*

In 1890, Arthur N. Talbot, Professor of Municipal and Sanitary Engineering at the University of Illinois, defined for civil engineering the “railway transition curve” (Talbot – 1912), with similar equations as Euler did for elasticity and Fresnel and Cornu for optical applications.

The name **clothoid **was suggested by the Italian mathematician Ernesto Cesàro. The word clothoid comes from *klothos*, the Greek word for spin (wool) the shape of the curve thread that wraps around the spindle. The same root appears in the name of *Clotho* (The Spinner), one of the three Fates who holds the thread of human destiny.

**Clothoid geometry and (some) math**

The clothoid equations can be defined starting from the condition of linear relation between radius and length:

This defines an infinite spiral, starting from the origin (x=0, y=0, R=∞, L=0) and spinning in two infinite loops to two points where R=0 and L=∞:

The constant A is called *flatness* or *homothetic parameter* of the clothoid.

The clothoid coordinates and the majority of the other characteristic elements of the spiral can be defined based on this essential parameter. For example, the clothoid *curvature gradient* is **1 in A²**.

In road design, an alignment developed to have all the transitions with practically the same A is seen as an optimum design, providing similar comfort conditions from the point of view of the variation of the lateral acceleration across all the transitions of that route. Some of the national road design standards are considering this criteria together with superelevation and aesthetic conditions (TAC – 2009).

In railway design an alignment developed with constant A is providing constant rate of change of the Equilibrium Cant (the sum of the rates of change of cant and cant deficiency). If this is done together with a constant E/D ration across all the curves, that alignment will provide practically the same comfort conditions over all the transitions and also similar wear conditions for top of railhead.

The angle α_{i }, measured between the tangent in the current point i of the clothoid and the initial direction (where R = ∞), is called* direction angle* and is computed dependant on the length of the clothoid arc to the current point L_{i } , and the current radius R_{i }:

where L is the total length of the clothoid and R its final radius.

The Cartesian coordinates of the clothoids can be defined starting from the above equation; using Euler (Fresnel) integrals for sine and cosine, these coordinates are:

Both equations have infinite terms. For railway track and road design, only a part of the clothoid can be practically used – the arc starting from origin to the area where the deflection angle α ≈ 90°.

For this section of the clothoid arc the first 4 terms of the equations provide sufficient accuracy to allow the site tracing of the transition curve.

Before the introduction of the Computerised Aided Design (CAD) in the alignment design for road and railway, the clothoid coordinates were computed based on a set of tables defined for a *reference clothoid* (usually the one defined by Aₒ = 100) and using the following relation:

Any other clothoid can be defined based on this property (called *homothety* relative to the origin O) :

Another option largely used was to consider only the first term of the x and y equations, defining in this way the *cubic parabola,* a close approximation of the clothoid.

#### Clothoid shift

As the clothoid spiral develops, the circle defined by the radius R is gradually shifted away from the x axis. This shift is defined as:

The first term of this equation defines the shift for the cubic parabola.

*(to be continued)*

*Later edit: (09/10/2016) The direction angle equation was added based on the blog comments.*

##### References:

Cope, G. (1993) *British Railway Track – Design, Construction and Maintenance*. Permanent Way Institution, Echo Press, Loughborough.

Racanel, I. (1987) *Drumuri moderne. Racordari cu clotoida. (Modern roads. Clothoidal transitions). *Editura Tehnica, Bucharest. Romania.

Levien, R. (2008) *The Euler Spiral: A mathematical history. *University of California at Berkeley. (report available online on digitalassets.lib.berkeley.edu)

Radu, C. (2001)* Parabola cubica imbunatatita (Improved cubic parabola)*. Technical University of Civil Engineering Bucharest.

Radu, C., Ciobanu, C. (2004) *Elemente referitoare la utilizarea parabolei cubice imbunatatite (Elements related to the use of the improved cubic parabola)*. Third Romanian National Railway Symposium, Technical University of Civil Engineering Bucharest. Romania.

Talbot, A. N. (1912) *The Railway Transition Curve. *Fifth Edition. Engineering News Publishing Co. New York. (available online on archive.org)

TAC (2009) *Geometric Design Manual for Canadian Roads. – Volume 2. *Transportation Association of Canada

The Clothoid formula should be the same no matter where it is used, including MRT (Mass Rapid Transit?).

It’s length and requirements on curvature variation or relation to cant transition have particular rules defined dependent of the type of alignment/infrastructure or railway administrator/regulator, even country. I would expect those to be defined by MRT standards.

LikeLike

Can have a formule to calculate the Clothoid transition curve in MRT

LikeLike

Hi, I wonder whether the second part of shift calculation formula should not be L^4/(2688R^3) instead of L^4/(2668R^3)? At least that is so in this document:

http://www.mygeodesy.id.au/documents/Horizontal%20Curves.pdf

And a simple experiment with drawing a clothoid in Civil3D seems to confirm the assumption above.

LikeLike

Yes, you are right. 2668 in my formula is just a typo – the correct figure should be 2688 as demonstrated in section 5.6 of the document you quoted. Thank you for spotting this out!

LikeLike

Yes. Email me on ciobanu.ctin at gmailcom

Send me the xml file and any other data or information that might be relevant.

LikeLike

Damn. All the XML was filtered away. Could I write you an email?

I’m going to do a blog post on all of this and can link to it afterwards…

LikeLiked by 1 person

Hi again.

Thank you so much for answering.

I’m really testing out my hair over this… 😅

Well it is probably just me who can’t make sense of the parameters.

The example parameters I sent is taken from a mapping file format called SOSI. It’s Norwegian.

This is an example in XML with a bit more to it:

7023540.121876 566725.007461 7023558.015556 566734.987750 7023579.617363 566769.289112

Are you able to recognise some of these variables?

I mean how would you go about drawing this curve?

And then in SOSI format I only have the start end end point, sart and end radius and the parameter (which I’m not totally sure what is. They call it a flatness parameter).

Sorry for the load.

I hope you can help as you are probably the most clothoid knowledgeable person I have talked to so far… 🙂

LikeLiked by 1 person

Hi Ejnar,

Thank you for your comment.

I am not sure I understand the challenge … Parameter = 10; you mean A = 10?

For R = 300 m and A = 10 the clothoid length is 0.333m. However, the distance between the start and end points you gave is 2061 m.

If start and end are defined the parameter is already defined – to allow the length to connect those points.

Or, for Rstart and Rend fixed, if the clothoid homothetic parameter (A) is defined, the length is fixed so either the start or the end would need to be omitted.

From what I understand, you are imposing too many constraints for a solution to be provided.

Am I missing something?

When start and end points are provided and manual calculation are required then the procedure is more complicated than what I presented here. But there are software which can do it.

LikeLike

very clear explanation.

I have a challenge though.

Im trying to draw a clothoid from an imported file format.

Its parameters are given as:

Radius1 = -300.0 (negative value means the spiral is turning left)

Radius2 = 0.0

Parameter = 10.0

Start point = 101000 602000

end point 100500 600000

would you be able to give any hints on how to draw it from these parameters?

Best regards

Ejnar Brendsdal

LikeLike

The formulas you quoted are the same as the ones I showed in the article, just presented in a different form. For example, 9676800 = 25200

(2^6)(3*2).LikeLike